| Customization: | Available |
|---|---|
| After-sales Service: | 1years |
| Warranty: | 1years |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
GSK 25i is a new generation of high-performance and high-reliability CNC system developed through continuous innovation and improvement. It integrates cutting-edge technologies in the field of CNC today, with powerful functions, convenient operation and wide application range.
GSK 25i boasts the new-generation CNC controller, faster data processing speed, higher system stability, stronger control functions, multi-axis linkage, bus control, high speed, high precision and absolute encoder.
| Axis control function | Specification | |||
| Axis control function | ||||
| Maximum number ofcontrol axes | 8 feed axes plus 2 servo spindles | |||
| Number of linkage axes | 4-axis linkage | |||
| 5-axis linkage | ||||
| Number of controlled PLC axes | Up to 8 axes | |||
| Synchronous controlof feed axis | Up to 4 groups | |||
| Closed loop control | Support incremental, absolute encoder or grating ruler | |||
| Minimum instruction unit | Minimum instruction unit IS-B | 0.001mm | 0.0001inch | 0.001° |
| Minimum instruction unit IS-C | 0.0001mm | 0.00001inch | 0.0001° | |
| Minimum detection unit | Minimum instruction unit IS-B | 0.001mm | 0.0001inch | 0.001° |
| Minimum instruction unit IS-C | 0.0001mm | 0.00001inch | 0.0001° | |
| Maximum instruction value | +999999.9999mm+99999.9999inch+999999.9999° | |||
| Maximum feed speed | Maximum feed speed 200m/min | |||
| Automatic accelerationand deceleration | Linear before interpolation, S-curve acceleration/deceleration, jerk control | |||
| High-speed and high-precision machining | G05 high-speed small line segment look-ahead interpolation, path smoothing, and up to 1000 look-ahead and read-ahead segments | |||
| 5-axis control function(optional) | ||||
| RTCP function | Tool center point control G43.4 | |||
| Inclined surface machining | Five-axis positioning (3+2) machining G68.2 | |||
| Five-axis manual feed | Manual feed in tool axis, right angle direction of tool axis and rotation direction of tool center point | |||
| Programming function | ||||
| Program format | ISO instruction standard, program name: 0+4 digits, segment number N+5 digits, G+3 digits,coordinate value lP 6 digits before the decimal point, coordinate value lP : 4 after the decimapoint, S+5 digits, T+3 digits, M +3 digits, F+6 digits before the decimal point and F+4 digits after thedecimal point | |||
| Interpolation function | 48 groups of basic coordinate system G52-G59 and additional extended coordinate system (G54.1) | |||
| Workpiece coordinate system | 48 groups of basic coordinate system G52-G59 and additional extended coordinate system (G54.1) | |||
| Tool compensation | C tool compensation function. 400 sets of tool compensation | |||
| Programming function | There are more than 100 G instructions in total, including 12 common fixed cycles, 19 special fixedcycles and compound cycles, face milling, coordinate system rotation, scaling, mirroring, automatictool length measurement, tool center point control, and inclined surface machining commands. Thenumber of subroutine calls is 4, and the user macro program is type B | |||
| Program storage | 4G Memory,up to 400 programs | |||
| Reference point function | G27 returns to reference point to check: G28 returns to reference point; G29 returns from the reference point; G30 returns to reference points 2, 3 and 4 |
|||
| Skip function | G31 skip function for tool and workpiece measurement | |||
| Programmable control function | Programmable stroke limit (G22 and G23), programmable data input (G10) | |||
){kind=link}